We buy Olsun Electrics transformers from industrial facilities, electrical contractors, renewable-energy projects and other sellers across Virginia. Olsun Electrics builds dry-type and liquid-filled transformers in Richmond, Illinois, and its units are used in industrial, renewable and specialty applications. The nameplate matters more than a general description such as “plant transformer” or “solar transformer.”
An unused project spare, a transformer removed during a plant upgrade and a unit retired with a battery-storage installation can have very different specifications. We pay attention to the actual electrical ratings, construction and condition. Our transformer brands overview covers other manufacturers; brand names describe equipment only and do not imply manufacturer affiliation.
01Identify the Olsun Unit by Its Nameplate
Start with a sharp photo showing the entire Olsun Electrics nameplate. Include the serial number, model or catalog number, kVA rating, phase, frequency, primary voltage and secondary voltage. Photograph the manufacturing year or date if shown; do not substitute the installation date for the manufacturing date.
Connection information helps distinguish units that look similar from the outside. A rating such as 12470GrdY/7200 identifies a grounded-wye voltage relationship, while 480Y/277 describes a common low-voltage wye system. Capture the tap settings, impedance and winding connection diagram rather than relying on a handwritten inventory label.
For a specialty unit, photograph every rating plate and any terminal diagram attached to the enclosure. Multiple ratings or project-specific identifiers can be important. Use our transformer nameplate guide to locate the fields, and send close-ups if glare or faded lettering makes the main photo difficult to read.
02Olsun Dry-Type Transformers: Windings and Enclosures
We buy used and new-surplus Olsun dry-type transformers. For dry-type transformer equipment, we want to see the enclosure, ventilation openings, terminal compartment and accessible winding surfaces. Only provide interior photos when your qualified personnel can obtain them safely.
Useful nameplate details include insulation class, temperature rise and any stated cooling designation. These fields help describe the transformer’s thermal design; they are not interchangeable. Also identify copper or aluminum windings when documented, and note whether the enclosure, doors, terminal covers and connection hardware are complete.
Tell us about water exposure, heavy contamination, cracked insulation, overheating marks or missing components. A dry-type unit removed in operating condition is different from one retired after an electrical fault. Keep its actual condition separate from assumptions based on appearance, especially when equipment has been stored for an extended period.
03Liquid-Filled Olsun Units: Fluid and Cooling Details
We buy Olsun liquid-filled transformers, including used, surplus and decommissioned equipment. Show the tank, bushings, radiators, gauges and connection compartments. Note visible leaks, damaged bushings or missing accessories without opening sealed components or disturbing the fluid system.
Identify the insulating liquid from the nameplate, fluid label or maintenance records. Mineral oil and natural ester fluids such as FR3 are different fluid types, so do not describe every liquid-filled unit simply as “oil-filled.” Cooling classes such as ONAN and ONAF also matter when shown, particularly where the nameplate lists different ratings for natural and forced-air cooling.
PCB status must be disclosed and documented. Send available fluid test records and identify whether the documentation belongs to that specific serial number. Our oil-filled transformer buying page covers related equipment details. We do not ask sellers to drain fluid or provide environmental advice.
04Solar and Battery-Storage Transformers Need Exact Ratings
We buy Olsun transformers from solar and battery-storage projects, including unused project inventory and units removed from service. These transformers may connect inverter equipment to a collection system or serve other project loads. Identify the unit’s actual role rather than assuming every transformer on the site has the same specification.
For renewable-project equipment, send each winding’s voltage and kVA rating, winding connections, impedance and any documented application requirements. If the unit has multiple secondary windings, include the complete diagram. Project drawings and factory test reports can clarify a configuration that a single exterior photo cannot.
Keep transformer records separate from inverter, battery and switchgear records. Tell us whether the unit is a spare, a canceled-project asset or equipment removed during repowering, and identify included accessories. Our solar and wind transformer page provides additional context for renewable-energy equipment sellers.
05Virginia Sources and Condition Details That Matter
Olsun equipment can become surplus through industrial electrical upgrades, changes to specialty production equipment, renewable-project revisions or facility closures. We serve sellers in every Virginia region, from Northern Virginia and the Shenandoah Valley to Richmond, Hampton Roads and Southwest Virginia. Neighboring-state and nationwide equipment can also be reviewed on request.
We buy all brands and sizes within our range: single-phase transformers from 10 kVA and three-phase units from 15 kVA through MVA-class power transformers. For Olsun inventory, list each unit separately when ratings or condition differ. Matching enclosures do not prove that voltage ratios, impedance or internal configurations match.
When you sell Olsun Electrics transformer equipment, describe what you know about its last service and storage conditions. Include available test data without treating an old report as proof of current condition. Failed or damaged units receive case-by-case review; explain the failure, affected components and any investigation already documented.
06Send an Olsun Inventory for a Written Offer
Send clear nameplate and overall photos, location, quantity and condition notes through our offer form. We review the equipment and may ask about PCB status, test data or site access. If it fits, we send a written offer specifying price, freight, loading and payment terms; pickup is scheduled with you, and payment follows those terms. See how the buying process works for details.
For equipment still installed, tell us whether it is energized, disconnected or awaiting removal. We do not perform electrical disconnect work. Your own qualified electricians must de-energize and disconnect it; identify access restrictions, loading arrangements and available dimensions or documented weight without assuming those responsibilities are included.
Frequently asked questions
Can I sell an Olsun transformer with a missing or unreadable nameplate?
You can submit an Olsun transformer with a missing or unreadable nameplate, but identification may require additional records. Send photos of any serial tags, terminal diagrams and enclosure labels, along with purchase documents or test reports. Do not guess the voltage or kVA rating from enclosure size alone.
Do you buy unused Olsun transformers left over from a solar project?
We buy new-surplus Olsun transformers from solar projects. Send the complete ratings and winding diagram, plus storage history and details of included accessories. Identify any missing parts or shipping damage. An unused unit’s project designation does not replace its electrical specifications or documentation of its actual condition.
Will you buy an Olsun transformer from a battery-storage installation?
We buy Olsun transformers from battery-storage installations. Identify the transformer separately from batteries, inverters and switchgear, and provide all winding ratings and connection details. Tell us whether it is surplus or removed from service, and include available drawings or test records that describe its specific configuration.
What information should I send for an Olsun transformer that failed?
Send the Olsun nameplate, overall photos and a description of the failure; failed units receive case-by-case review. Identify visible winding, bushing or tank damage and provide available fault or test reports. For liquid-filled equipment, disclose and document PCB status. Do not drain fluid to prepare the unit for review.
Can I sell several Olsun units with different voltage ratings together?
Yes, we buy Olsun transformer inventories containing different voltage ratings. Provide a separate nameplate photo and condition entry for each unit, with quantities grouped only when specifications match. Include serial numbers so photos, test records and inventory entries can be tied to the correct equipment without confusion.
Is Virginia Transformer Buyers affiliated with Olsun Electrics?
No, Virginia Transformer Buyers is an independent buyer and is not affiliated with Olsun Electrics or any other manufacturer. We use the Olsun Electrics name only to describe equipment we buy. We are also not affiliated with Virginia Transformer Corp of Roanoke; this page is for sellers of transformer equipment.
